Services; Service; Dhcp - Tenda XPON ONT HG1 User Manual

7

Services

7.1

Service

7.1.1

DHCP

Overview
The DHCP server can automatically assign IP addresses, subnet masks, gateway addresses and DNS
to LAN clients. When it is disabled, you need to manually configure the IP address information on
the LAN device to access the internet. Disable it only when necessary.
To access the configuration page,
Service > DHCP.
Parameter description
Parameter Description
Specifies the status of the DHCP server.
⚫
DHCP Mode NONE: The DHCP server is disabled.
⚫
DHCP Server: The DHCP server is enabled.
Specifies the current LAN IP address of the ONT, which is also the IP address used to
LAN IP address
log in to the web UI of the ONT.
Subnet Mask Specifies the current subnet mask of the LAN.
IP Pool Range Specifies the range of IP addresses that a DHCP server can assign to LAN clients.
log in to the web UI of the ONT and navigate to Services >
29
Document version: V1.0