ORTHORALIX 9200
Service Manual
SECTION C: SETTING TO WORK
CONTENTS
1. INTRODUCTION ......................................... C-1
2. TOOLS AND INSTRUMENTS REQUIRED ... C-1
5.1.1. For Orthoralix 9200 Plus / Ceph / DPI .............. C-3
5.1.2. For Orthoralix 9200 DDE ................................... C-4
5.2. ALIGNMENT OF X-RAY FIELD TRANSCAN MODE ........ C-5
5.2.1. For Orthoralix 9200 Plus / Ceph ....................... C-5
5.2.2. For Orthoralix 9200 DDE ................................... C-6
5.3. TESTING THE CENTERING OF THE SYSTEM ............... C-7
5.4.1. For Orthoralix 9200 Plus / Ceph / DPI .............. C-8
5.4.2. For Orthoralix 9200 DDE ................................... C-8
DENTSPLY Gendex
1.
INTRODUCTION
This section details the adjustment and test procedures to be
followed for setting up the Orthoralix systems.
2.
TOOLS AND INSTRUMENTS
REQUIRED
Standard service tools.
Digital voltmeter.
Image quality phantom (supplied).
Light beam phantom (not supplied - code 4519 190 00922).
Intraoral films.
Panoramic films (not for Orthoralix DDE and DPI versions).
Ceph films (not for Orthoralix DDE and DPI versions).
Panoramic cassette without intensifying screens (not for Orthoralix
DDE and DPI versions).
(03.0)E
Section C
C-1