Operatio n
3.4.3
ONBOARDING (CONNECT TO THE LOCAL NETWORK)
RedbackINSTALL will advance to this stage after establishing a Bluetooth connection to
the Inverter.
Note: if a local network is not available it is possible to temporarily connect the Inverter
to a Wi-Fi hotspot, such as your phone. This is useful for configuration but is not an
acceptable long-term solution.
#
PROCEDURE
1.
Select the preferred method to connect to the local network and internet.
Options are:
• None
• LAN (must be hardwired, will connect automatically)
• Wi-Fi (usually requires network name and password)
2.
Select the required network or swipe down to refresh the list.
3.
Enter the password.
Tap Connect to continue.
4.
A Success message will appear.
Tap Continue to go to the Inverter Configuration page.
38
Installation Manual - Redback Smart Hybrid System - v2.0
This equipment is not
compatible with 5Ghz
Wi-Fi network or hotspots.
Use 2.4Ghz networks.
ILLUSTRATION