Installation Overview; Before You Go To Site - Redback SH5000 Installation Manual

Installation
2.1

Installation overview

Installation by non-approved installers may void the product warranty.
You are approved to install Redback products if you:
• Are a Redback registered and qualified installer, and
• Hold the required qualifications for installing grid-connected inverters, and
• Have a Redback Installer login.
2.1.1

BEFORE YOU GO TO SITE

A few simple preparations will help the installation run smoothly.
If you think you will require assistance, book a support call at
Register the installation at
Gather the required tools
o Normal electrician's tools including crimping kit and Cat 5 cable tools
o Electric drill/driver with 4mm Hex bit; Phillips head screwdriver bit; drill bits suitable for drilling walls
o Tape measure and spirit level
o Internet connected device with RedbackINSTALL app
Gather information required
Gather the following information for use during registration, installation, onboarding, and commissioning.
System serial number:
Your Redback Installer Login:
Homeowner
details
(required)
Homeowner
Wi-Fi details
Installation configuration
Regional Safety Zone
Soft Export Limit
Hard Export Limit
Soft Generation Limit
Hard Generation Limit
Compliance Inspector
Relay Assignments Relay 1
12
Installation Manual - Redback Smart Hybrid System - v2.0
redback.link/register
Apply at
Full name:
Installation address:
Email:
Mobile:
Wi-Fi Name:
Wi-Fi Password:
Relay 2
Relay 3
Relay 4
redback.link/support
(+Add device)
redback.link/apply
Not sure?
Contact Redback on
1300-240-182 if you are
unsure of your approval
status.