Installation - Redback SH5000 Installation Manual

Installation

Installation
Important safety instructions – please read
This document contains important safety instructions for products produced by Redback Technologies. Please read all the
instructions and cautionary markings on the product and on any accessories or additional equipment included in the
installation. Failure to follow these instructions could result in severe shock or possible electrocution. Always use extreme
caution to prevent accidents.
Audience
Installation, maintenance, and connection of inverters must be performed by qualified personnel, in compliance with local
electrical standards, wiring rules and the requirements of local power authorities and/or companies (for example AS4777 and
AS/NZS 3000 in Australia). The Redback Smart Hybrid strictly conforms to all related safety rules in design and test.
Safety regulations relevant to the location should be followed during installation, operation, and maintenance. Improper
operation may cause electric shock, or damage property, inverter, or equipment.
These instructions are for use by skilled, qualified personnel who:
• Meet all local and governmental code requirements for licensing and training for the installation of electrical power
systems with AC and DC voltage up to 600 volts
• Have CEC accreditation for installing grid-connected PV systems and energy storage systems
• Have knowledge of the functional principles and operation of grid-connected systems and knowledge of the installation of
electrical devices
• Understand the risk associated with installing and using electrical devices and can implement appropriate risk
management strategies
• During the preceding 12 months, have completed Redback approved training on the installation of the Redback SH5000
Smart Hybrid Inverter and BE14000 Battery Enclosure.
General safety
SYMBOL DEFINITION
WARNING: Limitations on use
This equipment is NOT intended for use with life support equipment or other medical equipment or devices.
CAUTION: Equipment damage
Only use components or accessories recommended or sold by Redback Technologies or its authorised agents.
IMPORTANT. Do not attempt to install this equipment if it appears to be damaged in any way. See the Warranty
document for instructions on returning the equipment.
Personal safety
SYMBOL DEFINITION
WARNING: PERSONAL INJURY
• Use safe lifting techniques when handling this equipment. For guidance visit
contact your local WHS authority.
• Use standard safety equipment when working on this equipment such as safety glasses, ear protection,
steel-toed safety boots, safety hard hats, etc.
• Use standard safety practices when working with electrical equipment. (Remove all jewellery, use insulated
tools, wear cotton clothing etc).
• Never work alone when installing or servicing this equipment. Have an assistant to help if necessary.
• Do not touch the inverter during operation. The temperature of some parts of the inverter may exceed 60°C
during operation. Let it cool for at least 5 minutes after shutdown before touching it.
• Ensure that children, pets, and other animals are kept away from the inverter, solar arrays, battery bank and
utility grid components.
• If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
10
Installation Manual - Redback Smart Hybrid System - v2.0
safeworkaustralia.gov.au or