Connect Your System To The Internet; Ethernet - Redback SI5000 Owner's Manual

Connect your system to the internet

Onboarding connects your system to the internet using your network. Connection to the network is by Ethernet cable or Wi-Fi.
There are two easy ways to check if your system is online:
1. Login to the Redback portal. If your system is "Online" and refreshing data every 6o seconds, then it is connected.
2. Login to the MyRedback app. If data is refreshing every 60 seconds, then the system is connected.
Occasionally, it may be necessary to reconnect your inverter to the internet. This most frequently occurs after a significant
disruption to your network such as replacing your router, changing passwords, or changing internet providers.
There are two onboarding processes: Ethernet or Bluetooth Low Energy (BT or BLE).

Ethernet

Ethernet is the preferred method of connection: onboarding occurs automatically, confirmed by:
• Inverter Status LED is BLUE
• Communications module LAN icon is blue.
To connect using ethernet, your system must have the optional "EMS Ethernet" communications module installed. Ask your
installer for assistance if you would like to connect using ethernet.
Owner's Guide – Redback Smart Inverter - v1.4 13
Redback Technologies