Configuring The Local Display; Factory Setting Of Local Display For Level Measurements; Adjusting The Local Display - Endress+Hauser Levelflex FMP56 Operating Instructions Manual

Levelflex FMP56, FMP57 FOUNDATION Fieldbus
Endress+Hauser
11.5

Configuring the local display

11.5.1

Factory setting of local display for level measurements

Parameter Factory setting for devices with 1 current
output
Format display 1 value, max. size
Value 1 display Level linearized
Value 2 display Distance
Value 3 display Current output 1
Value 4 display None
11.5.2

Adjusting the local display

The local display can be adjusted in the following submenu:
Setup → Advanced setup → Display
Commissioning via operating menu
Factory setting for devices with 2 current
outputs
1 value, max. size
Level linearized
Distance
Current output 1
Current output 2
83