Communication-Specific Accessories; Service-Specific Accessories - Endress+Hauser Levelflex FMP56 Operating Instructions Manual

Levelflex FMP56, FMP57 FOUNDATION Fieldbus
Endress+Hauser
Technical data
• Quick and easy setup with the SmartBlue app
• No additional tools or adapters needed
• Signal curve via SmartBlue (app)
• Encrypted single point-to-point data transmission (tested by Fraunhofer Institute) and
password-protected communication via Bluetooth® wireless technology
• Range under reference conditions:
> 10 m (33 ft)
• When the Bluetooth module is used, the minimum supply voltage of the device increases
by up to 3 V.
If retrofitting:
• Order number: 71377355
• The use of the Bluetooth module may be restricted depending on the transmitter
approval. A device may only be retrofitted with the Bluetooth module if the option NF
(Bluetooth module) is listed under Optional specifications in the Safety Instructions (XA)
associated with the device.
For details, see the "Special Documentation" SD02252F
16.2

Communication-specific accessories

Commubox FXA291
Connects Endress+Hauser field devices with a CDI interface (= Endress+Hauser Common
Data Interface) and the USB port of a computer or laptop
Order number: 51516983
For details, see "Technical Information" TI00405C
Field Xpert SFX350
Field Xpert SFX350 is a mobile computer for commissioning and maintenance. It enables
efficient device configuration and diagnostics for HART and FOUNDATION Fieldbus
devices in the non-Ex area.
For details, see Operating Instructions BA01202S
Field Xpert SFX370
Field Xpert SFX370 is a mobile computer for commissioning and maintenance. It enables
efficient device configuration and diagnostics for HART and FOUNDATION Fieldbus
devices in the non-Ex area and the Ex area.
For details, see Operating Instructions BA01202S
16.3

Service-specific accessories

DeviceCare SFE100
Configuration tool for HART, PROFIBUS and FOUNDATION Fieldbus field devices
Technical Information TI01134S
FieldCare SFE500
FDT-based plant asset management tool
It can configure all smart field units in your system and helps you manage them. By using
the status information, it is also a simple but effective way of checking their status and
condition.
Technical Information TI00028S
Accessories
119