Endress+Hauser Levelflex FMP56 Operating Instructions Manual page 144

Operating menu
Medium type
Navigation
Description
User interface
Factory setting
Additional information
Medium property
Navigation
Prerequisite
Description
Selection
Factory setting
144
"Level" submenu
Navigation  Setup → Advanced setup → Level
 Setup → Advanced setup → Level → Medium type
Specify type of medium.
• Liquid
• Solid
FMP56, FMP57: Solid
This parameter determines the value of several other parameters and strongly
influences the complete signal evaluation. Therefore, it is strongly recommended not
to change the factory setting.
 Setup → Advanced setup → Level → Medium property
EOP level evaluation ≠ Fix DC
Specify the dielectric constant ε
• Unknown
• DC 1.4 ... 1.6
• DC 1.6 ... 1.9
• DC 1.9 ... 2.5
• DC 2.5 ... 4
• DC 4 ... 7
• DC 7 ... 15
• DC > 15
Depends on the Medium type (→  144) and Medium group parameters.
Levelflex FMP56, FMP57 FOUNDATION Fieldbus
of the medium.
r


Endress+Hauser