Removing Tall Crop Feed Plates: Under Driveline Deflector - MacDon R85 Operator's Manual

2. Remove feed plate (A).
3. Return the tall crop feed plates to the storage location.
See Section 6.10.3 Returning Tall Crop Feed Plates to
Storage, page 87.
Removing Tall Crop Feed Plates: Under Driveline Deflector
1. Open cutterbar doors.
Doors, page 31.
2. Remove the deflectors. See
• Removing the Driveline Deflector, page 138
• Removing the Driven Deflector, page 137
3. Remove feed plate (A).
4. Return feed plates to storage. See Section
Returning Tall Crop Feed Plates to Storage, page
5. Install the deflectors. See
• Installing the Driveline Deflector, page 139
• Installing the Driven Deflector, page 138
6. Close cutterbar doors.
Doors, page 31.
169457
OPERATING THE HEADER
See Section 5.5 Cutterbar
6.10.3
See Section 5.5 Cutterbar
Figure 6.29: RH End
87.
Figure 6.30
86
Rev. F