Installing The Hydraulic Motor - MacDon R85 Operator's Manual

5. Cover gearbox opening (A) with a rag or plastic.

Installing the Hydraulic Motor

Follow these steps to install the hydraulic motor:
1. Remove covering from gearbox (A) opening.
2. Place motor (B) on gearbox opening.
3. Install four bolts (D). Torque to 103 ft·lbf (140 N·m).
4. Remove caps from motor ports and hoses and
reconnect hoses (A and C) to motor.
169457
MAINTENANCE AND SERVICING
155
Figure 7.71
Figure 7.72
Rev. F