Installing A Disc - MacDon R85 Operator's Manual

Installing a Disc

CAUTION
Exercise caution when working around the blades.
Blades are sharp and can cause serious injury.
Wear gloves when handling blades.
1. Position new disc (C) on spindle ensuring it is 90° to
the adjacent discs.
2. Install cover (B) and secure with four bolts (A). Tighten
bolts to 92 ft·lbf (125 N·m).
3. Install previously removed rotary deflector. See
• Installing the Driven Deflector, page 138
• Installing the Driveline Deflector, page 139
4. Close cutterbar door(s). See Section
Doors, page 31.
169457
MAINTENANCE AND SERVICING
5.5 Cutterbar
128
Figure 7.25
Rev. F