MacDon R85 Operator's Manual page 153

4. Turn adjuster nut (A) counterclockwise until springs are
loose and there is no tension on belt (B).
5. Remove conditioner drive belt (A).
6. Install new conditioner drive belt (A) onto pulleys,
ensuring it is in the pulley grooves.
7. Tension conditioner drive belt (A). See
Conditioner Drive Belt, page
8. Install and tension auger drive belts. See
the Auger Drive Belts, page
9. Close driveshield.
169457
MAINTENANCE AND SERVICING
Inspecting the
142.
Replacing
151.
145
Figure 7.52
Figure 7.53
Rev. F