MacDon R85 Operator's Manual page 24

11. MD #194521
a. Auger entanglement hazard.
b. CAUTION
• To avoid injury from entanglement with rotating
auger, stand clear of header while machine
is running.
c. General hazard pertaining to machine operation
and servicing
d. CAUTION
• Read the operator's manual and follow safety
instructions. If you do not have a manual, obtain
one from your Dealer.
• Do not allow untrained persons to operate
the machine.
• Review safety
Operators annually.
• Ensure that all safety signs are installed
and legible.
• Make certain everyone is clear of machine
before starting engine and during operation.
• Keep riders off the machine.
• Keep all shields in place and stay clear of
moving parts.
• Disengage header drive, put transmission in
neutral, and wait for all movement to stop before
leaving operator's position.
• Stop the engine and remove the key from ignition
before servicing, adjusting, lubricating, cleaning,
or unplugging machine.
• Engage locks to prevent lowering of header or
reel before servicing in the raised position.
• Use slow moving vehicle emblem and flashing
warning lights when operating on roadways
unless prohibited by law.
169457
SAFETY
instructions with all
Figure 1.33: MD #194521
16
Rev. F