Hazard Lights: Replacing The Lamp Bracket - MacDon R85 Operator's Manual
Rotary disc 16-foot self-propelled windrower header
Hide thumbs
Also See for R85:
- Operator's manual (220 pages) ,
- Assembly instructions manual (122 pages) ,
- Unloading and assembly instructions (55 pages)
Table of Contents
Advertisement
Hazard Lights: Replacing the Lamp Bracket
Follow these steps to replace the lamp bracket:
1. Disconnect lamp wires from wiring harness at
connectors (A).
2. Remove four bolts (B) and remove lamp assembly (C)
from header.
3. Place new lamp assembly (C) on header and secure
with four bolts (B).
NOTE: Ensure amber reflector (D) faces the front
of the machine.
4. Connect lamp wires to wiring harness (A).
169457
MAINTENANCE AND SERVICING
158
Figure 7.77
Rev. F
Advertisement
Table of Contents
