Table of Contents
Advertisement
Operating instructions
In addition to the faults shown on the touch panel, other faults can occur. The
table below shows some faults which can be rectified by the operator.
Troubleshooting
Problem
Noise from the washing
pump.
The machine is not
cleaning properly.
The trays do not dry.
All errors displayed on the touch panel have an error code, which is displayed in
the alarm. This error code must be specified when contacting service personnel.
When you contact service personnel, you will need to provide the following
information:
•
•
•
•
WD-40BRE
Cause
Foam in the tank.
For causes and actions, see "4.2.9 Checking the wash result".
The rinse nozzles are blocked.
Too little drying agent.
Machine type and model.
Machine serial number and date when the machine was installed.
A brief description of the problem. Are any error codes shown on the touch
panel?
What happened/was being done immediately before the fault occurred?
37
Action
Change the water.
Check and clean the nozzles.
Check the quantity of drying agent.
Rev. (202303)
Advertisement
Table of Contents
