Table of Contents
Advertisement
Operating instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
In the following chapter, figures are given in brackets to clarify what needs to be
done. These numbers refer to image and list above.
4.1.2 ON/OFF button
The light on the ON/OFF button indicates the following:
•
•
•
•
WD-40BRE
Curtain
Emergency stop
ON/OFF button
Touch panel
Grille for drying zone fan
Alarm lamp for indication of alarms (extra equipment)
Main switch
Alarm lamp to indicate filters are full in the chemical wash tank (extra
equipment)
Rinse nozzle for final rinse (the rinse pipes in the final rinse can be supplied
as extra equipment in a design that can be removed for cleaning).
Washer arm (removable)
Rinse nozzle pre-rinse
Photocell
Filters
Rubber sleeve
Level pipe
Off - the machine's main switch is in the OFF position or there is no power
supply to the machine.
Blue light – machine in standby mode. The machine's main switch is in the
ON position.
Note: When the main switch is set to the ON position, it will take up to 25
seconds before the ON/OFF button illuminates blue.
Green light – machine in operation. The touch panel display illuminates and
can be used.
Note: When the ON/OFF button with a blue light is pressed, it will take up
to 10 seconds before the button turns green and the touch panel
illuminates.
Red light - an emergency stop has been pressed or other error. Follow the
instructions on the touch panel display for measures.
23
Rev. (202303)
Advertisement
Table of Contents
