Table of Contents
Advertisement
Operating instructions
•
•
•
•
•
N.B.! The time it takes for the machine to fill and heat up to the right washing
temperature varies between 5 and 30 minutes and depends on the temperature
of the incoming water.
The figure above will be displayed when the machine is ready for washing.
WD-40BRE
Check that the ON/OFF button beneath the touch panel is illuminated blue
and the machine is in standby mode.
Press the ON/OFF button to start the machine. It may take up to 10
seconds before the screen on the touch panel illuminates and the ON/OFF
button illuminates green.
Press the start button (1) in the activity field to start filling and heating.
Then follow the instructions on the touch panel. The activity text (2)
describes what is happening or what must be done.
The machine has an Autostart function, where a date and time can be
entered for the automatic filling and heating of the machine. The function is
located under Autostart in the main menu and only works if level pipes have
been set and all the doors are closed.
29
Rev. (202303)
Advertisement
Table of Contents
