Table of Contents
Advertisement
Operating instructions
Error alarms (yellow)
An error alarm is generated, e.g. because of a low temperature in one of the
tanks.
1.
2.
3.
4.
5.
6.
The alarm can be minimised and then maximised by clicking on the button (1)
Follow the instructions on the touch panel, which are displayed by clicking on the
symbol (5).
The alarm can normally be reset using the X button (6) if you do not wish to click
through the entire guide. Some alarms cannot be reset, and the alarm will then
remain active until the reason for the alarm ceases to exist.
WD-40BRE
Type of alarm and minimise / maximise
Error code
Symbol for type of alarm
Descriptive text
Continue to next screen
Reset alarm
39
Rev. (202303)
Advertisement
Table of Contents
