Transport; Installation; Detergent And Drying Agent - Wexiodisk WD-40BRE Installation And User Manual

Tray dishwasher
Table of Contents

Advertisement

Safety instructions
In order to avoid dangerous situations, the following must be followed:

2.2 Transport

Handle the machine with care during unloading and transport; there is a risk of it
tipping over. Never lift or move the machine without using the wooden packaging
to support the stand.

2.3 Installation

For increased safety, it is recommended to equip the installation with a ground
fault circuit breaker.

2.4 Detergent and drying agent

Be aware of the risks involved in handling detergents and drying agents.
Protective gloves and safety glasses should be used when handling, and an
eyebath should be within easy access. Read the warning text on the detergent
and drying agent containers as well as the detergent supplier's instructions.
WD-40BRE
Switch off the machine immediately in the event of failure or malfunction.
Make sure the machine is non-live before removing the cover plate. Turn
off the power using the power switch or the main switch. If required, the
switch must be locked to prevent unintentional operation.
Shut off the tap for incoming water and drain the machine's tank(s) before
starting work. Let the machine cool down as pipes for water, washing
pumps, booster heaters and valves become very hot when the machine is
in operation.
The machine and equipment requires an annual service. The machine
should be serviced by a person authorised or trained to do so by us. Use
original spare parts.
Warranty repairs must be performed by an authorised company. Contact
an authorised service company to draw up a programme of preventive care
and maintenance. For authorised service companies, please see
www.wexiodisk.com or contact Wexiödisk AB.
The regular checks described in the manual must be carried out in
accordance with the instructions.
The machine is designed for quick electrical installation.
The machine must be connected to a lockable power switch, if it does not
have an internal main switch.
Make sure that the mains voltage is the same as that indicated on the
machine's rating plate.
6
Rev. (202303)

Advertisement

Table of Contents
loading

Table of Contents