Table of Contents
Advertisement
Important Instructions
❏ Always turn the printer off using the
P
until the
light stops flashing.
❏ If you are not going to use the printer for a long period, be sure to unplug the power cord from the electrical
outlet.
Advisories and Warnings for Using the Printer with a Wireless
Connection
❏ Radio waves from this printer may negatively affect the operation of medical electronic equipment, causing
them to malfunction. When using this printer inside medical facilities or near medical equipment, follow
directions from the authorized personnel representing the medical facilities, and follow all posted warnings and
directions on the medical equipment.
❏ Radio waves from this printer may negatively affect the operation of automatically controlled devices such as
automatic doors or fire alarms, and could lead to accidents due to malfunction. When using this printer near
automatically controlled devices, follow all posted warnings and directions on these devices.
Advisories and Warnings for Using the Touchpad
❏ The touchpad only responds when touched directly with your finger.
❏ The touchpad may not respond if your fingers are wet, if you are wearing gloves, or if there is a protective sheet
or sticker on the touchpad.
❏ Do not use sharp objects such us a ballpoint pen or mechanical pencil to perform operations. The touchpad
may be damaged.
❏ If the touchpad gets dirty, wipe it with a soft cloth. If it is very dirty, dip a soft cloth in a solution diluted with
neutral detergent, squeeze it well, wipe off the dirt, and then wipe it with a soft dry cloth. Do not use volatile
chemicals such as thinner, benzene, or alcohol. The surface of the touchpad may be damaged.
❏ Avoid locations subject to rapid changes in temperature and humidity. Condensation will form inside the
touchpad, and may cause performance to deteriorate.
❏ The LCD screen may contain a few small bright or dark spots, and because of its features it may have an uneven
brightness. These are normal and do not indicate that it is damaged in any way.
❏ Do not press the touchpad with too much force or subject it to heavy impacts. The touchpad could break.
Contact your dealer if the touchpad surface chips or cracks, and do not touch or attempt to remove the broken
pieces.
Advisories and Warnings for Transporting or Storing the Printer
❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Before transporting the printer, make sure that the print head is in the home (far right) position.
>
Printer Advisories and Warnings
P
button. Do not unplug the printer or turn off the power at the outlet
13
>
Advisories and Warnings for Transporting or Stori
...
Advertisement
Table of Contents
