Sending The Scanned File To The Network - Epson AcuLaser CX29NF User Manual

6
Path
7
Login Name
8 Login Password
9 Confirm Login Password
10 Port Number
After you configured settings, go to "Sending the Scanned File to the Network" on page 178.

Sending the Scanned File to the Network

1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ "Making Copies From the ADF" on page 129
To store the scanned document in the shared folder directly without creating
any subfolder, leave the space blank.
To store the scanned document in the folder you created under the shared
folder, enter the path as following.
Example: Share Folder name, MyShare, Second-level folder name: MyPic,
Third-level folder name: John
You should now see MyShare\MyPic\John in your directory.
In this case, enter the following item.
Path: \MyPic\John
Enter the user account name that has access to the shared folder on your
computer.
Enter the password corresponding to the above login name.
Note:
Empty password is not valid in the Scan to Computer feature. Ensure that you
have a valid password for the user login account. (See "Confirming a Login name
and Password Using SMB" on page 159 for details on how to add a password in
your user login account).
Re-enter your password.
Enter the port number. If you are unsure, you can enter the default value of 139
for SMB.
Epson AcuLaser CX29 Series User's Guide
Scanning 178