Motherboard Installation - Supermicro X13SWA-TF User Manual

Super X13SWA-TF User's Manual

2.3 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Tools Needed
Phillips
Screwdriver
(1)
Location of Mounting Holes
JBT1
DESIGNED IN USA
MAC CODE
USB0/1
JSD1
Note 1: To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lbf-in on each mounting screw during motherboard installation.
Note 2: Some components are very close to the mounting holes. Please take precau-
tionary measures to avoid damaging these components when installing the mother-
board to the chassis.
Phillips Screws
LED4
(UID-LED)
JPAC1
JSPDIF_OUT
BMC
BMC LED
M.2-C04
(PCIe 5.0 X4)
LED7 (M.2-C04 LED)
LED8
BIOS LICENSE BIOS LICENSE
X13SWA-TF
DIMME2
REV:1.01
DIMME1
DIMMF2
DIMMF1
PCH PCH
DIMMG2
DIMMG1
DIMMH2
DIMMH1
U.2-2 U.2-1
SATA0 SATA2 SATA5 SATA7
SATA1 SATA3 SATA4 SATA6
USB11
(USB3.2 Gen.2x2)
(10)
LAN2 LAN1
HD AUDIO
USB10
USB6/7 USB8/9 COM1
JUIDB1 (USB3.2 Gen 2X2)
(USB3.2 Gen 2x1) (USB3.2 Gen 2x1) VGA
5
AUDIO FP
JPL2
JPUSB1
JPW2
LAN
CTRL
JPL1
SP1
JD1
JPI2C1
(SPEAKER 1-4)
(PWR I2C)
LED1
JPW1
FAN1 FAN2 JSTBY1 FAN3 FAN4
(Power LED)
JF1
32
Standoffs (10)
Only if Needed
USB2/3
LAN
CTRL
DIMMD1
DIMMD2
DIMMC1
DIMMC2
DIMMB1
DIMMB2
DIMMA1
DIMMA2