Only, "PF0 and PF1", "PF0, PF1 and PF2", "PF0, PF1, PF2 and PF3", "PF0, PF1, PF2,
PF3 and PF4", "PF0, PF1, PF2, PF3, PF4 and PF5", "PF0, PF1, PF2, PF3, PF4, PF5 and
PF6", and All.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. The
default setting is 0 (up to 15 seconds).
The following information is displayed:
•
UEFI Driver
•
Adapter PBA
•
Device Name
•
Chip Type
•
PCI Device ID
•
PCI Address
•
Link Status
•
MAC Address
•
Virtual MAC Address
TLS Authenticate Configuration
This submenu allows you to configure Transport Layer Security (TLS) settings.
Server CA Configuration
This feature allows you to configure the client certificate that is to be used by the server.
Enroll Certification
This feature allows you to enroll the certificate in the system.
Enroll Certification Using File
This feature allows you to enroll the security certificate in the system by using a file.
Certification GUID
Press <Enter> and input the certification Global Unique Identifier (GUID).
123
Chapter 4: UEFI BIOS