Table of Contents
Advertisement
Super X13DEG-M User's Manual
2.3 Motherboard Installation
Make sure that the locations of all the mounting holes for the motherboard and the chassis
standoffs match. Metal mounting fasteners are highly recommended because they ground
the motherboard to the chassis. Make sure that the metal standoffs click in or are screwed
in tightly.
Tools Needed
Torque Driver (1)
P54V_JPWR1
JSWID2
JSWID1
BT1
JNCSI1
EJ21
JRK1
JL1
JNVI2C1
JNVVPP1
JPWR4
FAN1
Location of Mounting Holes
Note 1: To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lbf-in on each mounting screw during motherboard installation.
Note 2: Some components are very close to the mounting holes. Please take precau-
tionary measures to avoid damaging these components when installing the mother-
board to the chassis.
Phillips Screws
EJSW_3
EJSW_4
EJSW_5
EJSW_6
EJNIC1
EJNIC2
EJNIC3
PLX
PLX
Switch 1
Switch 2
JMCIO1A JMCIO1B
EJNVME1
EJNVME2
BAR CODE
BIOS LICENSE
MAC CODE
CPU1
LED7 (TOP)
LED4 (BOTTOM)
JM2_D
(12)
EJSW_7
EJSW_8
EJSW_PWR2
EJNIC4
EJNIC5
EJNIC6
PLX
PLX
Switch 3
Switch 4
JMCIO2A JMCIO2B
EJNVME3
EJNVME4
X13DEG-M
REV:1.01
DESIGNED IN USA
CPU2
ALWAYS POPULATE BLUE SOCKET FIRST
FST_110
FST_80
FAN2
FAN3
58
Standoffs (12)
Only if Needed
EJSW_9
EJSW_10
JSW1
12V
JPWR3
BMC
LEDBMC
JS1
JS2
JSSW2
PCH
JTPM1
JBT1
JFP2
JPWR5
FAN4
Advertisement
Table of Contents
