Motherboard Installation - Supermicro X13DAI-T User Manual

Super X13DAI-T User's Manual

2.3 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Tools Needed
Phillips Screwdriver (1)
JPTG1
COM1
M.2-C1
(NVME ONLY)
LED4
JTP1 T-SGPIO1
USB0/1
MH13
JPG1
MH12
FANC
JS1
(SATA0~7)
FANB
M.2-C2
FANA
(NVME ONLY)
FAN4
JL1
Locations of Mounting Holes
Note 1: To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lbf-in on each mounting screw during motherboard installation.
Note 2: Some components are very close to the mounting holes. Please take precau-
tionary measures to avoid damaging these components when installing the mother-
board to the chassis.
BMC
LAN
CTRL
FAN8
LEDBMC1
FAN7
JNCSI1
FAN6
FAN5
BIOS
LICENSE
MH10 MH11
JBT1
(CLEAR CMOS)
JVRM2
JVRM1
PCH
USB6/7 (3.0)
USB8 (3.1 Gen 2)
BT1
JSD1 JSD2
LED7
I-SATA9 I-SATA8
FAN3
Phillips Screws (9)
VGA
LAN2
USB4/5 (3.0) USB2/3 (3.0)
CPU2
X13DAI-T MAC CODE BAR CODE
REV:1.00
IPMI CODE CM CODE
DESIGNED IN USA
CPU1
52
Standoffs (9)
(Only if Needed)
AUDIO FP
LAN1
JAUDIO1
FAN9
JPWR2
JPWR3
JPWR1
JPI2C1
(PWR I2C)
JF1
FAN1
FAN2