Supermicro X13SWA-TF User Manual page 116

Super X13SWA-TF User's Manual
Onboard Video Option ROM
Select EFI to allow you to boot the computer using the Extensible Firmware Interface (EFI)
device installed on the onboard video port. The options are Disabled and EFI.
CPU SLOT1 PCIe 5.0 X16 OPROM / CPU SLOT3 PCIe 5.0 X16 OPROM / CPU SLOT4
PCIe 5.0 X16 OPROM / CPU SLOT5 PCIe 5.0 X16 OPROM / CPU SLOT6 PCIe 5.0 X16
OPROM / CPU SLOT7 PCIe 5.0 X16 OPROM / M.2 C01 – C04 OPROM
Note: The CPU SLOT1/4/6 PCIe 5.0 X16 OPROM features are for W-3400 proces-
sors only.
Select EFI to allow you to boot the computer using the EFI device installed on the PCIe
slot specified. The options are Disabled and EFI.
Onboard LAN1 Option ROM
Use this feature to select which firmware function to be loaded for onboard LAN1. The options
are Disabled and EFI.
HTTP Boot Configuration

HTTP Boot Policy
Use this feature to set the HTTP boot policy. The options are Apply to all LANs, Apply to
each LAN, and Boot Priority #1 instantly.
HTTPS Boot Checks Hostname
Enable this feature for HTTPS boot to check the hostname of the TLS certificates to see if it
matches the host name provided by the remote server. The options are Enabled and Disabled
(WARNING: Security Risk!!).
Priority of HTTP Boot
Instance of Priority 1 (Available when your motherboard supports this feature)
This feature sets the rank target port. The default setting is 1.
Select IPv4 or IPv6
This feature specifies which connection the target LAN port should boot from. The options
are IPv4 and IPv6.
Boot Description
Use this feature to enter a boot description, which cannot be longer than 75 characters. Please
be sure to enter a boot description; otherwise, the boot option for the URI cannot be created.
116