Supermicro X13SWA-TF User Manual page 125

Intel(R) Virtual RAID on CPU
Note 1: It is available when a device is connected to the CPU slots, M.2 slots or U.2
connectors, and VMD support is enabled for the slot or connector.
Note 2: To enable a slot for VMD Support, go to Advanced -> Chipset Configuration
-> North Bridge -> IIO Configuration -> Intel VMD Technology -> Intel VMD for Volume
Management Device on CPU. After making changes on VMD configuration, reboot the
system for the changes to take effect. Then this feature will be available under the
Advanced menu.
The following information is displayed:
•
Intel(R) VROC with VMD Technology x.x.x.xxxx
•
Upgrade key:
•
Intel VROC Managed Controllers
All Intel VMD Controllers
The device information will be displayed in the Non-RAID Physical Disks.
Note: For detailed instructions on how to configure VROC RAID settings, please refer
to the VROC RAID Configuration User's Guide posted on the web page under the link:
https://www.supermicro.com/support/manuals/.
Driver Health

This feature displays the health information of the drivers installed in your system, including
LAN controllers, as detected by the BIOS. Select one and press <Enter> to see the details.
Note: This section is provided for reference only, for the driver health status will dif-
fer depending on the drivers installed in your system. It's also based on your system
configuration and the environment that your system is operating in.
125
Chapter 4: UEFI BIOS