Supermicro X13SWA-TF User Manual page 61

Standby Power
The Standby Power header is located at JSTBY1 on the motherboard. You must have a card
with a Standby Power connector and a cable to use this feature. Refer to the table below
for pin definitions.
Disk-On-Module Power Connector
The Disk-On-Module (DOM) power connector at JSD1 provides 5V power to a solid-state
DOM storage devices connected to one of the SATA ports. Refer to the table below for pin
definitions.
JUIDB1
LED4
(UID-LED)
JPAC1
JSPDIF_OUT
AUDIO FP
BMC
BMC LED
M.2-C04
(PCIe 5.0 X4)
LED7 (M.2-C04 LED)
LED8
JBT1
BIOS LICENSE BIOS LICENSE
X13SWA-TF
DIMME2
REV:1.01
DIMME1
DESIGNED IN USA
DIMMF2
DIMMF1
MAC CODE
PCH PCH
USB0/1 DIMMG2
DIMMG1
DIMMH2
DIMMH1
2
U.2-2 U.2-1
JSD1 SATA0 SATA2 SATA5 SATA7
SATA1 SATA3 SATA4 SATA6
USB11
(USB3.2 Gen.2x2)
Standby Power
Pin Definitions
Pin# Definition
1 +5V Standby
2 Ground
3 No Connection
DOM Power
Pin Definitions
Pin# Definition
1 5V
2 Ground
3 Ground
LAN2 LAN1
HD AUDIO
USB10 USB6/7 USB8/9
COM1
(USB3.2 Gen 2X2) USB2/3
(USB3.2 Gen 2x1) (USB3.2 Gen 2x1) VGA
5
JPL2
JPUSB1
JPW2
LAN
LAN CTRL
CTRL
JPL1
DIMMD1
DIMMD2
DIMMC1
DIMMC2
DIMMB1
DIMMB2
DIMMA1
DIMMA2
SP1
1
JD1
JPI2C1
(SPEAKER 1-4)
(PWR I2C)
LED1
JPW1
FAN1 FAN2 JSTBY1 FAN3 FAN4
(Power LED)
JF1
61
Chapter 2: Installation
1. Standby Power Header (JSTBY1)
2. Disk-On-Module (DOM) Power
Connector (JSD1)