Supermicro X13SWA-TF User Manual page 40

Super X13SWA-TF User's Manual
22110 M.2 Device Installation
1. Locate the pre-installed standoff. Remove the
standoff screw and set it aside.
2. Insert the M.2 device or the heatsink assembly into the M.2 socket at a 30-degree angle
and press it down.
Standard M.2 device
3. Tighten the standoff screw to secure the M.2 device or the heatsink assembly into place.
Do not overtighten so as to avoid damaging the M.2 device.
Standard M.2 device
M.2 device with Supermicro heatsink
M.2 device with Supermicro heatsink
40