Supermicro X13SWA-TF User Manual page 122

Super X13SWA-TF User's Manual
iSCSI Name
Use this feature to enter the unique initiator name in iSCSI qualified name (IQN) format.
CHAP ID (Available when "CHAP Authentication" is set to Enabled)
CHAP ID
Use this feature to enter the iSCSI initiator CHAP ID.
CHAP Secret (Available when "CHAP Authentication" is set to Enabled)
Use this feature to enter the iSCSI initiator CHAP secret (password).
iSCSI First Target Parameters

IP Address
Use this feature to configure the iSCSI target IP address.
TCP Port
Use this feature to configure the iSCSI target TCP port number (1 – 65535). The default
value is 3260.
Boot LUN
Use this feature to configure the boot LUN number (0 – 255). The default value is 0.
iSCSI Name
Highlight the feature and press enter to create an iSCSI name.
CHAP Secret (Available when "CHAP Mutual Authentication" is set to Enabled)
Use this feature to specify the iSCSI storage target CHAP secret (password).
Device Level Configuration
Virtualization Mode
This feature is not supported.
Shared Memory Features
Use this feature to disable the usage of reserved memroy regions to allow direct assignment
of the device to guest virtual machines. Options are Disabled and Enabled.
Active physical Functions
Use this feature to specify which physical functions are enabled. Disabled functions will
not be exposed and their associated ports will be completely shut down. Options are PF0
122