Table of Contents
Advertisement
2.3 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Tools Needed
Phillips Screwdriver (1)
FAN8
COM2
JIPMB1
JPFR1
JSTBY1
JRK1
JPME2
BT1
JBT1
S-SGPIO1
JF1
LEDPWR
PCH
JSEN1
JSD1 JSD2
SATA4~7
FAN4
AUDIO_FP
JPAC1
Locations of Mounting Holes
JPAC1:AUDIO
Note 1: To avoid damaging the motherboard and its components, please do not use
1-2:ENABLE
2-3:DISABLE
a force greater than 8 lbf-in on each mounting screw during motherboard installation.
Note 2: Some components are very close to the mounting holes. Please take precau-
tionary measures to avoid damaging these components when installing the mother-
board to the chassis.
Phillips Screws (17)
VGA
USB2/3 (3.0)
BMC
FAN6
BMC_LAN
LAN2
LEDBMC
USB0/1 (3.0)
CPU2
USB6 (3.0)
CPU1
1
USB4/5 (3.0)
JTPM1
FAN3
JHD_AC1:Audio AC97 and HD audio jumper
53
Standoffs (17)
(Only if Needed)
UID-LED
UID-SW
COM1
LAN
FANB
CTRL
LAN1
X13DEG-QT
REV:1.10
DESIGNED IN USA
BIOS LICENSE
BAR CODE
IPMI CODE
MAC CODE
SAN MAC
P2_NVME0/1
P2_NVME2/3
P1_NVME0/1
P1_NVME2/3
FANA
Chapter 2: Installation
JPAUX1:WOL of onboard LAN
1-2:ENABLE
2-3:DISABLE
JPTG1:10Gb LAN
1-2:ENABLE
2-3:DISABLE
FAN7
JNCSI1
MT2_2
MT1_2
MT2_1
MT1_1
M.2-C2
M.2-C1
MT1_F
MT2_F
M2_2_LED1
M2_1_LED1
FAN10
FAN9
FAN5
JPW1
FAN2
FAN1
Advertisement
Table of Contents
