I/O Devices
•
Serial (COM) Port
•
SATA 3.0
•
U.2
•
Video Connection
•
Audio
Peripheral Devices
•
One front accessible USB 2.0 header for two USB connections (USB0/1)
•
Two USB 2.0 ports on the rear I/O panel (USB2/3, Type A)
•
One front accessible USB 3.2 Gen 1 header for two USB connections (5Gb, USB4/5)
•
Four USB 3.2 Gen 2x1 ports on the rear I/O panel (10Gb, USB6/7, USB8/9, Type A)
•
One USB 3.2 Gen. 2x2 port on the rear panel (20Gb, USB10, Type C)
•
One front accessible USB 3.2 Gen 2x2 20-pin header for one USB connection (20Gb, USB11)
BIOS
•
AMI BIOS
•
ACPI 3.0 or later, PCI firmware 4.0 support, BIOS rescue hot-key, SPI dual/quad speed support, Real Time Clock (RTC)
wakeup, and SMBIOS 3.0 or later
Power Management
•
ACPI power management
•
Power button override mechanism
•
Power-on mode for AC power recovery
•
Wake-on-LAN
•
Power supply monitoring
System Health Monitoring
•
Onboard voltage monitoring for +/-12V, +5V/+5V standby, +3.3V, and +3.3V standby
•
Onboard temperature monitoring for CPU, VRM, LAN, PCH, system, and memory
•
7+1 CPU switch phase voltage regulator
•
CPU/System overheat control
•
CPU thermal trip support
•
Platform Environment Control Interface (PECI)
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual cooling zones
•
Low-noise fan speed control
•
Ten 4-pin fan headers
System Management
•
SuperDoctor® 5
•
Chassis intrusion header and detection
•
Intel Converged Security and Management Engine (CSME)
Firmware Integrity/System Security
•
Trusted Platform Module (TPM) support
•
One serial port on the rear I/O panel (COM1)
•
Eight SATA 3.0 ports at 6 Gb/s (SATA0 – 7)
•
Two U.2 connectors for NVMe 2.5" SSD drives (U.2-1, U.2-2)
•
One VGA port on the rear I/O panel (VGA)(IPMI only)
•
One 7.1 HD audio port on the rear I/O panel
15
Chapter 1: Introduction