Supermicro X13SWA-TF User Manual page 53

FP Power LED
The Front Panel Power LED connection is located on pins 15 and 16 of JF1. Refer to the
table below for pin definitions.
NMI Button
The non-maskable interrupt (NMI) button header is located on pins 19 and 20 of JF1. Refer
to the table below for pin definitions.
1
Power Button
Reset Button
3.3V
Red+
(Blue LED_Cathode_UID)
P3V3_STBY
P3V3_STBY
ID_UID/3.3V Stby
3.3V
Key
2
NMI
19
FP Power LED
Pin Definitions (JF1)
Pins Definition
15 3.3V
16 FP PWR LED
NMI Button
Pin Definitions (JF1)
Pins Definition
19 NMI
20 Ground
2
Ground
Ground
Power Fail (for LED6)
Blue+
(Red OH/Fan Fail/PWR Fail for LED5/Blue UID LED)
NIC2 Active LED
NIC1 Active LED
HDD LED
1
FP PWR LED
Key
Ground
20
53
Chapter 2: Installation
1. FP PWR LED
2. NMI