Supermicro X13SWA-TF User Manual page 99

Overclocking Feature (Available for CPU supporting overclocking)
Overclocking Feature
This feature enables the CPU overclocking. The options are Enabled and Disabled.
*If the feature of Overclocking is set to Enabled, the following feature will become
available for configuration:
Processor
VF Configuration Scope
Use this feature to configure the VF curve. The options are All-core and Per-core.
If "VF Configuration Scope" is set to All-core, the following settings will apply to all cores.
if "VF Configuration Scope" is set to Per-core, then you will be allowed to specify the
following settings for each core.
Core Voltage Mode
This feature controls the core voltage mode. The options are Adaptive and Override.
Core Extra Turbo Voltage (Available when "Core Voltage Mode" is set to Adaptive)
Enter a value for the extra turbo voltage (in mV) that will be applied while performance-core
is operating in turbo mode. The range is 0-2000. The default is 0.
Core Voltage Override (Available when "Core Voltage Mode" is set to Override)
Use this feature to specify the override voltage (in mV) applied to the performance-core
domain. The range is 0-2000. The default is 0.
Core Max OC Ratio
This feature controls the general maximum overclocking ratio for the CPU cores and Ring.
The default is 0.
Core Voltage Offset
Enter a value for the offset voltage (in mV) that will be applied to global performance-core
domain. The range is -500 – 500. The default is Auto.
Offset Prefix
Use this feature to set the prefix value as a positive (+) or a negative (-). The options
are "+" and "-".
TMUL Ratio Offset
Enter a value for TMUL ratio offset. The range is 0 – 31.The default is 0 (no offset).
99
Chapter 4: UEFI BIOS