Supermicro X13SWA-TF User Manual page 96

Super X13SWA-TF User's Manual
IIO eDPC Interrupt (Available when your system supports this feature and when
"IIO eDPC Support" is set to On Fatal Error/On Fatal and Non-Fatal Errors)
Select Enable to enable IIO eDPC Interrupt support. The options are Enable and Disable.
IIO eDPC ERR_COR Message (Available when your system supports this feature
and when "IIO eDPC Support" is set to On Fatal Error/On Fatal and Non-Fatal
Errors)
If this feature is set to Enable, an IIO eDPC error correction message will be displayed.
The options are Enable and Disable.
CXL Security Level
By defining security protocols, CXL standards provide protection against the data security
threats. Use this feature to set the CXL security level for data transiting the CXL link. The
options are Fully Trusted, Partially Trusted, Untrusted, and Auto.
•
Fully Trusted: This option allows the CXL device to access CXL.$ for both host-
attached and device-attached memory ranges in the write-back (WB) address space.
•
Partially Trusted: This option allows the CXL device to access CXL.$ for device-
attached memory ranges only.
•
Untrusted: If this option is selected, the host (your system) will abort all requests on
CXL.$.
•
Auto: This option is based on Si Compatibility.
CXL Header Bypass
Set this feature to enable or disable the CXL header bypass. The options are Disable
and Enable.
Intel VMD Technology
This section describes the configuration settings for the Intel VMD technology.
Note 1: After you've enabled VMD in the BIOS on a PCIe slot, this PCIe slot will be
dedicated for VMD use only, and it will no longer support any PCIe device. To re-activate
this slot for PCIe use, please disable VMD in the BIOS.
Note 2: The number of PCIe slots and the slot naming can differ depending on the
PCIe devices connected to your motherboard.
96