Supermicro X13SWA-TF User Manual page 121

PCI Virtual Functions Advertised
This feature displays the base PCI virtual functions advertised.
ISCSI Configuration
iSCSI General Parameters

TCP/IP Parameters via DHCP
Use this feature to acquire TCP/IP configuration from DHCP. Options are Disabled and
Enabled.
iSCSI Parameters via DHCP (Available when "TCP/IP Parameters via DHCP" is
set to Enabled)
Use this feature to acquire iSCSI configuration from DHCP. Options are Disabled and
Enabled.
CHAP Authentication
Use this feature to enable or disable CHAP authentication. Options are Disabled and
Enabled.
CHAP Mutual Authentication (Available when "CHAP Authentication" is set to
Enabled)
Use this feature to enable or disable mutual CHAP authentication. Options are Disabled
and Enabled. If enabled, enter the CHAP ID and password in the iSCSI Initiator Param-
eters page.
IP Version
This feature controls whether IPv4 or IPv6 network address will be used for iSCSI initiator
and targets. Currently only IPv4 is supported.
iSCSI Initiator Parameters

IP Address
Use this feature to configure the iSCSI initiator IP address.
Subnet Mask
Use this feature to set the netmask for the iSCSI initiator.
Default Gateway
Use this feature to set the gateway address for the iSCSI initiator.
121
Chapter 4: UEFI BIOS