Supermicro X13SWA-TF User Manual page 59

TPM/Port 80 Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM)/Port 80, which is
available from Supermicro (optional). A TPM/Port 80 header is a security device that supports
encryption and authentication in hard drives. It allows the motherboard to deny access if the
TPM associated with the hard drive is not installed in the system. Refer to the layout below
for the location of the TPM header. Please go to the following link for more information on
the TPM: https://www.supermicro.com/manuals/other/AOM-TPM-9670V_9670H.pdf.
Note: For Intel Xeon W-3400 (112L) CPU, if PCIe slot of CPU SLOT1 is installed with
a full-length add-on card, please use a horizontal TPM module to prevent mechanical
conflict.
JUIDB1
LED4
(UID-LED)
JPAC1
JSPDIF_OUT
AUDIO FP
BMC
BMC LED
M.2-C04
(PCIe 5.0 X4)
LED7 (M.2-C04 LED)
LED8
JBT1
BIOS LICENSE BIOS LICENSE
X13SWA-TF
DIMME2
REV:1.01
DIMME1
DESIGNED IN USA
1 DIMMF2
DIMMF1
MAC CODE
PCH PCH
USB0/1 DIMMG2
DIMMG1
DIMMH2
DIMMH1
U.2-2 U.2-1
JSD1 SATA0 SATA2 SATA5 SATA7
SATA1 SATA3 SATA4 SATA6
USB11
(USB3.2 Gen.2x2)
Trusted Platform Module Header
Pin Definitions
Pin# Definition
1 +3.3V
3 RESET#
5 SPI_CLK
7 SPI_MOSI
9 +3.3V Stdby
LAN2 LAN1
HD AUDIO
USB10 USB6/7 USB8/9
COM1
(USB3.2 Gen 2X2) USB2/3
(USB3.2 Gen 2x1) (USB3.2 Gen 2x1) VGA
5
JPL2
JPW2 JPUSB1
LAN
LAN CTRL
CTRL
JPL1
DIMMD1
DIMMD2
DIMMC1
DIMMC2
DIMMB1
DIMMB2
DIMMA1
DIMMA2
SP1
JD1
JPI2C1
(SPEAKER 1-4)
(PWR I2C)
LED1
JPW1
FAN1 FAN2 JSTBY1 FAN3 FAN4
(Power LED)
JF1
59
Pin# Definition
2 SPI_CS#
4 SPI_MISO
6 GND
8 NC
10 SPI_IRQ#
1. TPM/Port 80 Header (JTPM1)
Chapter 2: Installation