List Of Components; Key Features - Christie CP4440-RGB Installation And Setup Manual

ID Component
A Coolant hose
B Reservoir fill cap
C Coolant inlet port
D Coolant outlet port
E Exhaust vent
F Communication signal terminal
G Power supply terminal
H Chiller coolant filter
I Coolant drain port
Related information
Setting up the chiller unit (on page 35)

List of components

Verify all components were received with the projector.
• Touch panel, touch panel harness, and panel mounting arm
• High security key to open the projector service access door
• Teyu chiller CW-6200AN (P/N: 163-124108-XX)
• Chiller setup kit Plumbing (P/N: 163-149105-XX)
• Chiller setup kit air ducts (P/N: 163-150107-XX)
• Coolant propylene glycol (P/N: 003-006744-XX)
• Optional PLF Cinema pedestal (P/N: 163-126100-XX)
An optional UPS inlet power cord is also available.

Key features

Understand the important features of the projector.
• For all CineLife+
• Christie CineLife+
• High frame rate playback of 4K at 120 Hz, for premium, large format cinema venues
• Ability to work with Mystique software
• 4K 3D playback capability
• Compatible with ultra-high contrast (UHC) lens suite
• For all CineLife+
• Solid-state Christie RealLaser
CP4440-RGB and CP4450-RGB Installation and Setup Guide
020-103072-05 Rev. 1 (01-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
projectors:
™ electronics platform for ultra-fast processing
™ laser projectors:
™
RGB laser illumination
Introduction
18