Christie CP4440-RGB Installation And Setup Manual page 22

• Before lifting and positioning the projector, refer to the light intensity hazard distances.
• To avoid damage to the lens mount when lifting the projector, do not apply the load across the
front of the projector.
1. Using appropriately rated lift equipment, lift up the projector and move it to the location where
it will be used.
2. When lifting, make sure the load is applied only to the structural frame members across two
opposite sides of the projector.
The load should never be applied directly to a panel, cover or other non-structural component
of the projector. The following illustrations show the structural frame members of the
projector:
Lower projector
frame
Right side projector
frame
CP4440-RGB and CP4450-RGB Installation and Setup Guide
020-103072-05 Rev. 1 (01-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
22