Left side projector
frame
Rear projector
frame
Alternatively, the projector can be lifted using four rigging eyebolts installed into the four
anchor points in the top frame of the projector.
3. If installing the projector with the optional PLF Cinema Pedestal (P/N: 163-126100-XX), follow
the instructions provided with that accessory.
4. Position the projector so it is centered and parallel with the theater screen.
If space is limited, aim the projector slightly off-center and use lens offset to center the image
on the screen.
Related information
Light intensity hazard distance (on page 7)
CP4440-RGB and CP4450-RGB Installation and Setup Guide
020-103072-05 Rev. 1 (01-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
23