Advertisement
INTELLI-TRACK™ SPS SYSTEM
Install the Parking Area Assembly
Install the Parking Area Assembly(ies), align and fasten to the overhead support structure. Use 3/8"
Hex Head fasteners made from one of the following materials: A307 Galvanized or A316 Stainless Steel.
NOTE: ALWAYS USE LOCK WASHERS.
Install the Remaining Track Sections
NOTE: If your SPS System was ordered prefabricated, proceed to Step 3 on Page 6.
C.R. Laurence Co., Inc. • 2503 E. Vernon Ave., Los Angeles, CA 90058
Figure 4
Install the Parking Area First
Figure 5
Install the Remaining Track
Components
• 1.800.421.6144
P. 5
• crlaurence.com
Advertisement
Need help?
Do you have a question about the INTELLI-TRACK and is the answer not in the manual?
Questions and answers