Advertisement
INTELLI-TRACK™ SPS SYSTEM
Install the Top Seal System (Continued)
6. Remove the tape liner from the Base Extrusion and adhere the assembly in to the Wall Panel. Pressure should
be applied to the top of the Base Extrusion along its full length to set the tape.
7. Repeat Steps 1 through 6 for both sides of all Wall Panels in the system.
.
The Second Phase of the installation is complete.
C.R. Laurence Co., Inc. • 2503 E. Vernon Ave., Los Angeles, CA 90058
• 1.800.421.6144
• crlaurence.com
P. 25
Advertisement
Need help?
Do you have a question about the INTELLI-TRACK and is the answer not in the manual?
Questions and answers