Co2 Ambient - TESTO 330 Instruction Manual

Performing the measurement:
- The measurement starts and the meas. view is displayed
graphically (trend display).
- An audible alarm signal is triggered when the alarm limit is
reached.
3. Confirm the message: [OK].
Options:
[Options]
>
[Options] → Delete
>
is deleted.
[Options]
>
[Options]
>

6.2.13. CO2 ambient

✓ An ambient CO2 probe (0632 1240) must be connected.
Calling up the function:
Performing the measurement:
1. Select parameter → [Edit].
2. Enter data. [▲],
- The CO2amb is displayed.
Options:
[Options]
>
[Options] → Delete
>
is deleted.
[Options]
>
[Options]
>
form of a line graph.
→ Clipboard: Data are saved to the clipboard.
clipboard: Any data saved to the clipboard
→ Save: The meas. views are saved in a protocol.
→ A-Thresh.: The alarm thresholds menu is opened.
In order to obtain correct meas. views, it is imperative to
enter the prevailing abs. pressure. This can be entered
directly (Pressure
calculated when entering
(Pressure Barom.).
[▼] and partly [◄], [►]→ [OK].
→ Clipboard: Data are saved to the clipboard:
clipboard: Any data saved to the clipboard
→ Save: The meas. views are saved in a protocol.
Show Graphic: The meas. views are displayed in
→
Absolute), or it is automatically
Altitude and barometric pressure
6 Using the product
67