Co2 Ambient - TESTO 320 Instruction Manual

info@Testo-Direct.com
6 Using the product
leads to higher measured values. The best measurement
results are achieved when the probe is moved gently
backwards and forwards.
When using the ambient CO probe and the flue gas probe,
note that:
the probe must be in the fresh air (CO-free) during the
zeroing phase!
Call up function:
> [ ] → Measurement options
[OK].
Carrying out the measurement:
1. Start measurement:
- The measurement starts and the measured value is displayed
graphically (trend display).
- An audible alarm signal is triggered when the alarm limit is
reached.
2. End measurement:
3. Confirm the message: [OK].
Options:
> [Options] → Clipboard: data is saved to the clipboard.
> [Options] →
is deleted.
> [Options] → Save: the measured values are saved in a record.
> [Options] →
6.2.15.

CO2 ambient

This function is not available when the
selected.
✓ An ambient CO2 probe (0632 1240) must be connected.
In order to obtain correct measured values, it is imperative
to enter the prevailing absolute pressure. This can be
entered directly
calculated when entering
(Barometric
Call up function:
> [ ] → Measurement options
Carrying out the measurement:
1. Select parameter → [Edit].
56
www.
→ [OK] →
[ ].
[ ].
Delete clipboard: any data saved to the clipboard
Set alarm limits: the alarm limits menu is opened.
Spain country version is
(Pressure absolute), or it is automatically
Altitude and barometric pressure
pressure).
→ [OK] →
Testo-Direct
CO ambient →
AmbCO2 → [OK].
1.888.610.7664
.com