Co2 Ambient - TESTO 320 Instruction Manual

6.2.15.
info@Testo-Direct.com
All manuals and user guides at all-guides.com
Carrying out the measurement:
1. Start measurement:
- The measurement starts and the measured value is displayed
graphically (trend display).
- An audible alarm signal is triggered when the alarm limit is
reached.
2. End measurement:
3. Confirm the message: [OK].
Options:
[Options] → Clipboard: data is saved to the clipboard.
>
> [Options] → Delete
is deleted.
[Options] → Save: the measured values are saved in a record.
>
> [Options] → Set alarm

CO2 ambient

This function is not available when the
selected.
✓ An ambient CO2 probe (0632 1240) must be connected.
In order to obtain correct measured values, it is imperative
to enter the prevailing absolute pressure. This can be
entered directly
calculated when entering
(Barometric pressure).
Call up function:
> [ ] → Measurement options
Carrying out the measurement:
1. Select parameter → [Edit].
2. Enter values. [▲],
3. Start measurement:
4. End measurement:
- The ambient CO2 value is displayed.
Options:
> [Options] → Clipboard: data is saved to the clipboard.
> [Options] → Delete
is deleted.
> [Options] → Save: the measured values are saved in a record.
www.
[ ].
[ ].
clipboard: any data saved to the clipboard
limits: the alarm limits menu is opened.
Spain
(Pressure absolute), or it is automatically
Altitude and barometric pressure
→ [OK] →
[▼] and in some cases [◄],
[ ].
[ ].
clipboard: any data saved to the clipboard
Testo-Direct
6 Using the product
country version is
AmbCO2 → [OK].
[►] → [OK].
55
1.888.610.7664
.com