6.3.
Transferring data
6.3.1.
Protocol printer
To be able to transmit data via infrared or Bluetooth interface to a
Testo protocol printer, the printer to be used must have been
enabled, see Printer, page 49.
Representation of the available characters per line is limited on the
printout. Thus, the unit
mg/k.
6.3.2.
PC / Pocket PC
Data transfer to a PC can take place via USB, IrDA or Bluetooth
You must also refer to the documentation that comes with the
software.
mg/KWh
is displayed on the printout as
6 Using the product
®
.
73