Co2 Ambient - TESTO 320 Instruction Manual

6 Using the product
Carrying out the measurement:
1. Start measurement:
- The measurement starts and the measured value is displayed
graphically (trend display).
- An audible alarm signal is triggered when the alarm limit is
reached.
2. End measurement:
3. Confirm the message: [OK].
Options:
> [Options]
> [Options]
is deleted.
> [Options]
> [Options]
6.2.15.

CO2 ambient

This function is not available when the
selected.
✓ An ambient CO2 probe (0632 1240) must be connected.
Call up function:
> [
Carrying out the measurement:
1. Select parameter → [Edit].
2. Enter values. [▲],
3. Start measurement:
4. End measurement:
- The ambient CO2 value is displayed.
Options:
> [Options]
> [Options]
is deleted.
> [Options]
54
[
[
→ Clipboard: data is saved to the clipboard.
→
Delete
→ Save: the measured values are saved in a record.
→
Set alarm
In order to obtain correct measured values, it is imperative
to enter the prevailing absolute pressure. This can be
entered directly (Pressure
calculated when entering
(Barometric pressure).
→
] Measurement options
[▼]
[
[
→ Clipboard: data is saved to the clipboard.
→
Delete
→ Save: the measured values are saved in a record.
].
].
clipboard: any data saved to the clipboard
limits: the alarm limits menu is opened.
Spain
absolute), or it is automatically
Altitude
→
[OK]
and in some cases [◄],
].
].
clipboard: any data saved to the clipboard
country version is
and barometric pressure
→ → [OK].
AmbCO2
→ [OK].
[►]