Co2 Ambient - TESTO 330 Instruction Manual

6 Using the product
Pos: 73 /TD/Produkt verwenden/testo 330/testo 330 CO2-Umgebung @ 6\mod_1279194467663_7011.doc @ 66441 @
6.2.13.

CO2 ambient

✓ An ambient CO2 probe (0632 1240) must be connected.
Calling up the function:
> [
Performing the measurement:
1. Select parameter → [Edit].
2. Enter data. [▲],
3. Start measurement:
4. Quit measurement:
- The CO2amb is displayed.
Options:
> [Options]
> [Options]
> [Options]
form of a line graph.
> [Options]
opened.
> [Options]
edited.
> [Options]
available during a measurement) The measurement view menu
is opened.
Pos: 74 /TD/Produkt verwenden/testo 330/testo 330 Feuerungsautomat @ 6\mod_1279197122511_7011.doc @ 66473 @
54
In order to obtain correct meas. views, it is imperative to
enter the prevailing abs. pressure. This can be entered
directly (Pressure
calculated when entering
(Pressure Barom.).
] → Measurements
[▼]
[
[
→ Clipboard: Data are saved to the clipboard:
→ Save: The meas. views are saved in a protocol.
→ Show Graphic: The meas. views are displayed in
→ Alarm Limit: The alarm threshold menu is
→ Edit. Data for adjustable parameters can be
→ Measurement
Absolute), or it is automatically
Altitude and barometric pressure
→ [OK] → CO2amb
and partly [◄], [►]→ [OK].
].
].
View: (This function is not
→ [OK].