Protocols - TESTO 330 Instruction Manual

5 First steps
Create a new measuring location:
A location is always created under an address.
1. Select the address in which the location is to be created.
[Options]
2.
3. Enter values or make settings.
4. Finalise the entry: [Finished].
Other location options:
> [Options]
location.
> [Options]
location in the same address.
> [Options]
Create new address:
[Options]
1.
2. Enter values or make settings.
3. Finalise the entry: [Finished].
Other address options:
• Edit
• Copy
• Delete
locations created therein.
• Delete All
locations created in them.
5.4.

Protocols

Calling up the function:
There are various options for opening protocols, see
Address/Location, page 40
Display protocol:
1. Choose the required protocol from the detailed view.
2. Print [Data].
42
New/Location
→
→ Edit location: make changes to an existing
→ Copy location: make a copy of an existing
→ Delete location: delete an existing location.
New address
→
address: make changes to an existing folder.
address: make a copy of an existing folder.
address: delete an existing folder, including the
addresses: delete all existing folders, including the
→ [OK].
→ [OK].